A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

Sources, distribution, and risk assessment of organochlorine pesticides in Nairobi City, Kenya

The distribution and sources of organochlorine pesticides (OCPs) in air and surface waters were monitored in Nairobi City using triolein-filled semipermeable membrane devices (SPMDs). The SPMDs were extracted by dialysis using n-hexane, followed by cleanup by adsorption chromatography on silica gel cartridges. Sample analysis was done by GC-ECD and confirmed by GC–MS. Separation of means was achieved by analysis of variance, followed by pair-wise comparison using the t-test (p≤ 0.05). The total OCPs ranged between 0.018 – 1.277 ng/m³ in the air and <LOD – 1391.000 ng/m³ in surface waters. Based on the results, the means of Industrial Area, Dandora and Kibera were not significantly different (p≤ 0.05), but were higher (p≤ 0.05) than those of City square and Ngong’ Forest. The results revealed non-significant (p≤ 0.05) contribution of long-range transport to OCP pollution in Nairobi City. This indicated possible presence of point sources of environmental OCPs in the city. The water-air fugacity ratios indicated that volatilization and deposition played an important role in the spatial distribution of OCPs in Nairobi City. This indicated that contaminated surface waters could be major sources of human exposure to OCPs, through volatilization. The incremental lifetime cancer risks (ILCR) determined from inhalation of atmospheric OCPs were 2.3745  ×  10^?13 – 1.6845  ×  10^?11 (adult) and 5.5404  ×  10^?13 – 3.9306  ×  10^?11 (child) in the order: Dandora > Kibera > Industrial Area > City Square > Ngong’ Forest. However, these were lower than the USEPA acceptable risks, 10^?6 – 10^?4. This study concluded that atmospheric OCPs did not pose significant cancer risks to the residents.     

标准BOD5测定法的"空气净化--稀释水曝气"装置研究

"稀释与接种法"是BOD5的标准测定方法,制备溶解氧接近饱和且不含能干扰生化耗氧过程的物质的稀释水,是该法重要的工作之一.由真空泵带动的"空气净化--稀释水曝气"装置,流程合理、装配容易、调控灵活,可连贯进行空气净化与稀释水曝气,而制取符合质量要求的稀释水.     

人工曝气技术在河道污染治理中的应用

综述了国内外河道人工曝气技术的工程实践，介绍该技术的原理。在河流水质变化的不同时期应用河道曝气技术，可以分别达到消除黑臭，减少水体污染负荷，促进河流生态系统的恢复等目的，是种低成本、见效快的技术，具有较好的应用前景。     

物化-生化组合工艺处理化纤厂浆粕综合废水

根据化纤厂浆粕综合废水的水质特点 ,选择采用中和曝气 水解酸化 生物接触氧化 絮凝沉降处理工艺。实验结果表明 :当浆粕综合废水进水CODCr浓度 310 0～ 34 6 0mg/L ,BOD5浓度 10 2 0～ 142 0mg/L范围内时 ,处理后水质可达到《污水综合排放标准》GB8978 96中化纤浆粕工业二级排放标准。     

膜生物反应器膜污染的水力学控制实验研究

叙述了膜污染是影响膜-生物反应器处理技术推广应用的关键因素，采用水动力学方法是控制膜污染的有效方法。在不同污泥浓度条件下。对不同曝气强度下膜污染的发展速率及其形成机理进行了试验研究，研究结果表明：对应于不同污泥浓度均存在一个经济曝气强度，其大小随污泥浓度升高呈线性增加，膜生物反应器在经济曝气强度条件下运行可控制膜污染的发展；并从理论上推导出一个临界污泥浓度，其值为5．15g／L。对应于临界污泥浓度，并且污泥絮体在膜面可形成比较稳定的动态膜，膜过滤压差上升的速率最慢，膜生物反应器在此临界污泥浓度条件下运行膜污染发展最为缓慢。     

ABR反应器的设计

类似于多个UASB反应器串联起来运行的ABR反应器具有多种其它反应器不具备的优点，在处理化工颜料黄高盐生产废水的工程中，结合将高效复合微生物技术用于厌氧水解一连续曝气生化工艺取得成功；对ABR反应器而言，正确的设计参数是工程运行成功的保证。     

厌氧-好氧处理羊绒印染废水

采用厌氧 -好氧联合工艺处理羊绒印染废水 ,经实际运行表明 ,在进水 CODcr浓度为 80 0～ 2 0 0 0 m g/L情况下 ,厌氧去除效率稳定在 5 0 %左右 ,好氧去除效率大于 80 % ;该工艺管理方便 ,处理出水稳定 ,运行费用低     

循环式活性污泥法中厌氧生物选择区的运行条件研究

研究了循环式活性污泥法中厌氧生物选择区的停留时间、进水有机物浓度和系统中泥龄、曝气时间等运行参数对选择区内厌氧释磷以及有机物的吸收贮存的影响。结果表明，选择区停留时间lh，系统泥龄5d，曝气2h，进水有机物浓度COD／TP=60--70，选择器中释磷效果及微生物的吸附性能最优，可去除进水中78％的COD。而且污泥沉降性能良好，试验运行过程中，SVI一直保持在30--40ml／g左右。     

横向流中曝气气泡生成动力学及模拟研究

采用水平集方法和变物性的单一流体运动方程,结合显式时间步进的ICE数值算法,三维模拟了推流式曝气池内气泡的生成过程.重点研究了横向水流对曝气气泡生成动力学的影响.模拟的气泡形状演变过程与国外学者的可视化实验符合较好.模拟结果显示,与在静止水流中气泡的生成相比,曝气池内水横向流动对气泡的生成过程有重要的影响.由于受到水流施加的横向曳力作用,气泡逐渐倾斜向下游生长;气泡生成的时间明显缩短;生成气泡的体积也显著地减小.